26 Stage Wash Process

Our 26 stage wash process is the most thorough wash process available. We ensure the vehicle is completely clean before we undertake the paintwork correction process.

First of all we start off with a pre-wash (usually a citrus degreaser) to remove any heavy dirt on the lower half of the vehicle before it is pressure rinsed. Next, the alloys are cleaned inside and out using a dedicated proven wheel cleaner to prevent corrosion and discolouration, especially on chromed or powdercoated wheels, which can sometimes occur using common wheel cleaners with a high acid content. After the arches have been scrubbed, we then move onto the wash stage and every precaution is taken not to induce swirl marks by using a lambswool wash mitt in conjunction with the ‘two bucket method’.

1 Stage Paintwork Correction Process

Our paintwork correction process is second to none. This fastidious process involves removing any light scratches or swirl marks in the clear coat of the paintwork.

First of all we measure the paintwork depth to identify any low spots which should be avoided when polishing. We then permanently remove any blemishes in the paint which may have been induced before the car is delivered to the customer. Despite popular belief, brand new cars rarely look their best.

A one stage polishing process is carried out with this treatment.

Crystal Clear Lacquer Coating

In order to maintain that newly polished surface for the maximum amount of time, we apply nano composite materials to give the most durability. By applying Smart Surface Science, we can protect the paintwork finish underneath, giving your vehicle a deep wet look and making it easier to clean. Unlike a wax or a sealant, these products bond with the surface on a nano scale, offering up to 10 times the durability of dealership applied protection treatments.

And its not just the paintwork either! We apply hydrophobic protective coatings to the windscreen, the interior and the wheels which repel dirt and water.

Interior Cleaning & Protection

Our treatments arn’t just limited to the exterior! All interior surfaces are vacuumed and cleaned with the same care and attention as with our other processes. Over time, leather can become cracked with the changing temperatures, so it is important that it is conditioned to keep it soft and supple.

Dust is blown out of tight to access areas via a compressed air process and the glass is cleaned with a completely streak free product. The leather and textiles is then protected with a product to prevent staining.